Refine by
Marketplace.Centrelearnsolutions.Com Equipment & Supplies Near Myanmar
51,803 equipment items found
Showcase
Manufactured by:Nafx Medical based inCankaya, TURKEY
Hybrid Fixator Packs Hybrid external fixation is minimal invasive treatment option for especially tibia proximal metaphysis fractures. This system is also suitable for distal tibial fractures, ankle fractures. Hybrid external fixation is minimal invasive treatment option for especially tibia proximal metaphysis fractures. This system is also suitable for distal tibial fractures, ankle fractures ...
Showcase
Manufactured by:Nafx Medical based inCankaya, TURKEY
The AO-Type Tubular External Fixator (11 mm System) is a modular fixation system designed for the stabilization of complex fractures, particularly in the tibia, femur, and pelvis. Engineered for high mechanical strength and procedural flexibility, this system features 11 mm aluminium rods, compatible with a wide range of rod-pin clamps, rod-rod clamps, and connecting components. Ideal for open ...
Premium
Manufactured by:Nafx Medical based inCankaya, TURKEY
Long Needles and Loop Suture USP No:#2. It is for inside out meniscal suturing technique. This technique is a cost effective, so simple and very effective for most meniscal tears. This technique is ideal for both medial and lateral meniscus tears especially lateral and medial safe zones. ...
Premium
Manufactured by:Nafx Medical based inCankaya, TURKEY
A smart cortical fixation solution engineered for precise tensioning from the tibial side—offering predictable performance in minimally invasive ALL-INSIDE cruciate ligament reconstruction ...
Premium
Manufactured by:Nafx Medical based inCankaya, TURKEY
They are widely used because they are ready-to-use, practical and robust. These products, also known as Orthofix Type fixators, are preferred by orthopedic surgeons all over the world. Monolateral external fixators are produced in 3 different sizes suitable for tibia, femur and humerus. Each of the products is presented as ready to be sterilized and ready to use, with 6 schanz screws and allen ...
Premium
Distributed by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
SPARK PRO Endoscope Light Handle: Up to 1-3 hrs of Continuous Use on a Full Charge. Works from Two Rechargeable Batteries. Easy Light Output Control 10-100%. RoHS Compliant. IEC Compliance IEC60601-1 (3rd Ed). Sterilizable (Cidex OPA, Sterrad, Sterris, ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Bertin Bioreagent offers primary and secondary antibodies for laboratories. As essential tools, they are particularly versatile when properly ...
Premium
Manufactured by:Applied Physics based inTampa, FLORIDA (USA)
Silica Microspheres Nano-particles Particle Size Standards and Micro-beads. Silica nano-particles size standards used in Contamination wafer standards and drug ...
Premium
Distributed by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The FVG Video Gastroscopes also feature a waterproof insertion probe with 4-way tip articulation, an instrument channel for flexible forceps, additional channels for air/water, and suction (additional unit required), a wide angle 140 degree field of view, a focal range of 5mm – 100mm from the tip, and a 200 watt Halogen light source incorporated into the design. For customers looking to ...
Premium
Manufactured by:NIVUS GmbH based inEppingen, GERMANY
Hybrid Flow Measurement with Surface Radar and Ultrasonic Profile Scanner. Flow measurement for open channels as well as part filled pipes. Optimum results through combination of ultrasonic cross correlation and radar ...
Premium
Manufactured by:Nafx Medical based inCankaya, TURKEY
Dall-Miles Type Multifilment Wire Cable For Cerclage Fixation Co-Cr 19 thin wire ...
Premium
Manufactured by:Nafx Medical based inCankaya, TURKEY
Suture Anchor With Cannulated Shaft - Without Preloaded Needle is a single-use orthopedic implant designed for soft tissue fixation in arthroscopic and open procedures. Featuring a cannulated shaft, it allows precise placement over a guide wire and facilitates bone tunnel access. This anchor is optimized for manual suture loading, offering flexibility in suture selection and reducing the risk of ...
Premium
Manufactured by:LAND® based inDronfield, UNITED KINGDOM
The FG - Glass Forehearth is a simple two-wire, cost-effective Fibre Optic Thermometer for temperature measurement in glass production with 4 to 20 mA ...
Premium
Manufactured by:Nafx Medical based inCankaya, TURKEY
Gigli Wire For cutting the bone safely without any harm due to excess ...
Premium
Distributed by:Interstate Products, Inc. based inSarasota, FLORIDA (USA)
Disposable, full-length face shield. Provides protection from splashes and sprays. Optically clear for peripheral visibility. One size fits ...
Premium
Manufactured by:LAND® based inDronfield, UNITED KINGDOM
The DTT is a short-wavelength non-contact infrared Furnace Thermometer designed to provide temperature measurement for optical fibre drawing tower ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Sterilwave 900 is an advanced onsite system designed for the safe disposal of infectious medical waste. Using a fully electric process, it combines shredding and microwave sterilization within a 900-liter chamber, converting biomedical waste into dry, inert material. Tailored for hospitals and waste management operators, it ensures up to 8log10 microbial inactivation while significantly reducing ...
Premium
Manufactured by:Applied Physics based inTampa, FLORIDA (USA)
The Elga MEDICA Pro supplies Clinical Laboratory Reagent Water (CLRW) standard (for mally CLSI Type 1) water using purification technologies together with recirculation. This compact system is ideal to directly feed large or linked multiple ...
Premium
Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)
The Environics® Series Reduced Oxygen Breathing Device 3 is the newest in our line of systems that simulate altitude exposure and can be utilized for both research and hypoxia familiariation training. The comparable S3000 model expands the ROBD3 functionality and is used when research or training needs to include hyperoxia and/or hypercapnia ...
Premium
Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE
Designed for small healthcare facilities, Sterilwave 50 efficiently processes up to 100 liters of infectious waste per hour—approximately 10 kg—without the need for water, chemicals, or effluent discharge. Its fully electric system combines shredding and microwave sterilization in a single 50-liter chamber, converting biomedical waste into dry, inert material similar to household waste in under ...